FE35 Paints & Lubricants
Disposable Paint Mixing Cup 2L, 1.4L, 750ml, 385ml
Single-use Mixing Cups allow accurate mixing of all types of paints and varnishes these cups feature the mixing ratios 1:1, 2:1, 3:1, 4:1, 5:1.
£0.66 - £1.89
-
Mipa Sticky Dust-Trapping Tack Cloth
For reliable cleaning of surfaces before painting.
£2.32
-
Disposable Nylon Paint Strainer 190µ
Special nylon filter fabric allows all paints to be strained at the preparation stage completely fibre-free with 190 µ filter capacity. Easily used for rapid creation of high performance coatings.
£0.12
-
Hight Build QD ZP Primer Pale Grey 1L
Hight Build QD ZP Primer Pale Grey 1L A highly effective, premium quality, rapid drying primer for the protection of steelwork. It is anti-corrosive, with excellent adhesion to steel work and gives an extremely strong matt finish on metal surfaces. A great foundation for our ever popular enamel paint. Can be used with forced drying up to 70 degrees. Excellent adhesion to steelwork. Super fast drying time. Applications: It is essential that all surfaces are thoroughly cleaned and de greased before painting. Dying times may vary considerably depending on temperature & humidity. Conventional spray, excellent results using up to 10-15% TH2 WOCO Thinners by volume. Recommended tip size of 1.4 - 1.8mm Application pressure of 40-50 PSI Supplied at a suitable consistency for brush application where no further thinners is recommended. Surface dry at 20 degree C. - 25mins-35mins Hard dry at 20 degree C. 1-1.5 Hours Overcoating at 20 degree - Minimum of 40 mins. Manufactured on behalf of AgriComp in the United Kingdom by the Witham Group.
£18.95
-
Red Oxide Undercoat Primer 1L
Supercote Red Oxide Undercoat Primer 1L A highly effective, heavy duty, fast drying primer for the protection of steelwork. It is anti-corrosive, with excellent adhesion to steel work and gives an extremely strong matt finish on metal surfaces. A great foundation for our ever popular enamel paint. Can be used with forced drying up to 70 degrees. Applications: It is essential that all surfaces are thoroughly cleaned and de greased before painting. Dying times may vary considerably depending on temperature & humidity. Conventional spray, up to 15% TH25 Thinners by volume may be added. Recommended tip size of 1.4 - 1.8mm Application pressure of 40-50 PSI Supplied at a suitable consistency for brush application where no further thinners is recommended. Surface dry at 20 degree C. - 1 Hour Hard dry at 20 degree C. 8 Hours Overcoating at 20 degree - 16 Hours Manufactured on behalf of AgriComp in the United Kingdom by the Witham Group.
£19.49