Antifreeze & Coolants

Qualube Blue Anti-Freeze is a general purpose anti-freeze, based on silicate and nitrate inhibitor technology. It is a Mono Ethylene Glycol (MEG) based antifreeze and summer coolant, that provides maintenance free protection against freezing and boiling, but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required, Qualube Blue Anti-Freeze provides a high level of cost effective protection to cooling systems and is conformable to British Standard BS6580:1992 and BS 6580:2010. Available in 1 Litre, 5 Litre, 25 Litre Quantities.

Read more less

Qualube Blue Anti-Freeze is a general purpose anti-freeze, based on silicate and nitrate inhibitor technology. It is a Mono Ethylene Glycol (MEG) based antifreeze and summer coolant, that provides maintenance free protection against freezing and boiling, but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required, Qualube Blue Anti-Freeze provides a high level of cost effective protection to cooling systems and is conformable to British Standard BS6580:1992 and BS 6580:2010. Available in 1 Litre, 5 Litre, 25 Litre Quantities.

Read more less

Qualguard Si-OAT Coolant is an engine coolant concentrate based on monoethylene glycol. This product employs the latest antifreeze technology which combines the benefits of both organic technology and traditional mineral (silicate) technology. Si-OAT Coolant is suitable for both petrol and diesel engines and has been designed to meet the demands of OEMs who favour this combination of organic and silicate technology. Increased lifetime, allowing less frequent maintenance, thanks to the corrosion inhibitors which have a very low depletion rate. Thermal characteristics that permit effective engine cooling without boiling. Elimination of abrasive solids, which provides better protection of the water pump joints. Superior short & long term corrosion protection through combined use of organic acid & highly stabilised silicate additives, especially for aluminium engines. Environmentally friendly as free from borates, phosphates, nitrates & amines. Excellent anti-foaming characteristics. Meets most European and International specifications. Meets the following specification: AFNOR NF R15-601 {France), AS 2108 (Australia), ASTM D3306 {USA), ASTM D4656 (USA), ASTM D4985 {USA}, BS 6580 {UK), CUNA NC 956-16, SAE J1034, UNE 26367-88, MAN 324 Typ Si-OAT, FVV Heft R443, Porsche, Audi TL 774 G, Bentley TL 77 4 G, Bugatti TL 77 4 G, Lamborghini TL 77 4 G, Seat TL 774 G, Skoda TL 77 4 G, Volkswagen VAG TL 774 G, Cummins CES 14603, Deutz DQC CC-14, Liebherr Min LH-01-COL3A, Mercedes Benz MB 325.5 & MB 325.6, Scania, Qualube Qualguard Si-OAT Coolant is an extended life anti-freeze which should be replaced every 5-years or 250,000km passenger cars, 1,000,000km for trucks and commercial vehicles. However, the OEM (Original Equipment Manufacturers') recommendations should always be followed when replacing coolants. Recommended dilution rates for optimum protection & performance: Coolant 33% / Water 67% = Freeze protection -20°C Coolant 50% / Water 50% = Freeze protection -40°C Coolant 67% / Water 33% = Freeze protection -70°C Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less

Qualguard Si-OAT Coolant is an engine coolant concentrate based on monoethylene glycol. This product employs the latest antifreeze technology which combines the benefits of both organic technology and traditional mineral (silicate) technology. Si-OAT Coolant is suitable for both petrol and diesel engines and has been designed to meet the demands of OEMs who favour this combination of organic and silicate technology. Increased lifetime, allowing less frequent maintenance, thanks to the corrosion inhibitors which have a very low depletion rate. Thermal characteristics that permit effective engine cooling without boiling. Elimination of abrasive solids, which provides better protection of the water pump joints. Superior short & long term corrosion protection through combined use of organic acid & highly stabilised silicate additives, especially for aluminium engines. Environmentally friendly as free from borates, phosphates, nitrates & amines. Excellent anti-foaming characteristics. Meets most European and International specifications. Meets the following specification: AFNOR NF R15-601 {France), AS 2108 (Australia), ASTM D3306 {USA), ASTM D4656 (USA), ASTM D4985 {USA}, BS 6580 {UK), CUNA NC 956-16, SAE J1034, UNE 26367-88, MAN 324 Typ Si-OAT, FVV Heft R443, Porsche, Audi TL 774 G, Bentley TL 77 4 G, Bugatti TL 77 4 G, Lamborghini TL 77 4 G, Seat TL 774 G, Skoda TL 77 4 G, Volkswagen VAG TL 774 G, Cummins CES 14603, Deutz DQC CC-14, Liebherr Min LH-01-COL3A, Mercedes Benz MB 325.5 & MB 325.6, Scania, Qualube Qualguard Si-OAT Coolant is an extended life anti-freeze which should be replaced every 5-years or 250,000km passenger cars, 1,000,000km for trucks and commercial vehicles. However, the OEM (Original Equipment Manufacturers') recommendations should always be followed when replacing coolants. Recommended dilution rates for optimum protection & performance: Coolant 33% / Water 67% = Freeze protection -20°C Coolant 50% / Water 50% = Freeze protection -40°C Coolant 67% / Water 33% = Freeze protection -70°C Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less

Qualube Qualguard Si-OAT Coolant is an engine coolant concentrate based on monoethylene glycol. This product employs the latest antifreeze technology which combines the benefits of both organic technology and traditional mineral (silicate) technology. Si-OAT Coolant is suitable for both petrol and diesel engines and has been designed to meet the demands of OEMs who favour this combination of organic and silicate technology. Increased lifetime, allowing less frequent maintenance, thanks to the corrosion inhibitors which have a very low depletion rate. Thermal characteristics that permit effective engine cooling without boiling. Elimination of abrasive solids, which provides better protection of the water pump joints. Superior short & long term corrosion protection through combined use of organic acid & highly stabilised silicate additives, especially for aluminium engines. Environmentally friendly as free from borates, phosphates, nitrates & amines. Excellent anti-foaming characteristics. Meets most European and International specifications. Meets the following specification: AFNOR NF R15-601 {France), AS 2108 (Australia), ASTM D3306 {USA), ASTM D4656 (USA), ASTM D4985 {USA}, BS 6580 {UK), CUNA NC 956-16, SAE J1034, UNE 26367-88, MAN 324 Typ Si-OAT, FVV Heft R443, Porsche, Audi TL 774 G, Bentley TL 77 4 G, Bugatti TL 77 4 G, Lamborghini TL 77 4 G, Seat TL 774 G, Skoda TL 77 4 G, Volkswagen VAG TL 774 G, Cummins CES 14603, Deutz DQC CC-14, Liebherr Min LH-01-COL3A, Mercedes Benz MB 325.5 & MB 325.6, Scania, Qualube Qualguard Si-OAT Coolant is an extended life anti-freeze which should be replaced every 5-years or 250,000km passenger cars, 1,000,000km for trucks and commercial vehicles. However, the OEM (Original Equipment Manufacturers') recommendations should always be followed when replacing coolants. Recommended dilution rates for optimum protection & performance: Coolant 33% / Water 67% = Freeze protection -20°C Coolant 50% / Water 50% = Freeze protection -40°C Coolant 67% / Water 33% = Freeze protection -70°C Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less

Qualube Blue Anti-Freeze is a general purpose anti-freeze, based on silicate and nitrate inhibitor technology. It is a Mono Ethylene Glycol (MEG) based antifreeze and summer coolant, that provides maintenance free protection against freezing and boiling, but also gives excellent corrosion protection in cooling systems when mixed with the appropriate amount of water. Often used in older vehicles or applications where a modern long-life coolant is not required, Qualube Blue Anti-Freeze provides a high level of cost effective protection to cooling systems and is conformable to British Standard BS6580:1992 and BS 6580:2010. Available in 1 Litre, 5 Litre, 25 Litre Quantities.

Read more less

Qualguard ORATEC Coolant is a monoethylene glycol-based engine coolant concentrate. The additive package is designed with the latest inhibitor component technology to produce finished antifreeze, which is free of amine, phosphate & silicate. The combination of the long-lasting organic additives with carefully selected mineral inhibitors makes this technology extremely suitable for application in heavy-duty cast-iron engines. When mixed with water at the appropriate rate, the coolant will provide the following advantages:• Improved anticorrosion protection of all metals and especially cast iron which makes this product extremely useful in heavy duty application.• Excellent protection for cylinder liners from the effects of cavitation-erosion• Thermal characteristics that permit effective engine cooling without boiling.• Elimination of deposit problems caused by the use of hard water.• Protection against frost, depending on the concentration chosen.• Excellent antifoaming characteristics.• Meets most European and International Standards including ASTM D6210.• Suitable for use against applications requiring the CAT EC-1 standard. Qualguard ORATEC Concentrated Coolant is an extended life antifreeze which should be replaced every five years or every 250,000 km for passenger vehicles or every 1,000,000 km for trucks and commercial vehicles. Original Equipment Manufacturers’ (OEMs) recommendations should be followed when changing out cooling systems. Qualguard ORATEC Coolant complies with most European, International & OEM quality standards: AFNOR NF R15-601 (France), AS 2108 (Australia), ASTM D3306 (USA), ASTM D4656 (USA), ASTM D6210 (USA), BS 6580: 2010 (UK), Chinese Standard GB 29743-2013 (China), CUNA NC 956-16, FVV Heft R443, SAE J 1034, UNE 26361-88, CAT EC-1 Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less

Qualguard ORATEC Coolant is a monoethylene glycol-based engine coolant concentrate. The additive package is designed with the latest inhibitor component technology to produce finished antifreeze, which is free of amine, phosphate & silicate. The combination of the long-lasting organic additives with carefully selected mineral inhibitors makes this technology extremely suitable for application in heavy-duty cast-iron engines. When mixed with water at the appropriate rate, the coolant will provide the following advantages:• Improved anticorrosion protection of all metals and especially cast iron which makes this product extremely useful in heavy duty application.• Excellent protection for cylinder liners from the effects of cavitation-erosion• Thermal characteristics that permit effective engine cooling without boiling.• Elimination of deposit problems caused by the use of hard water.• Protection against frost, depending on the concentration chosen.• Excellent antifoaming characteristics.• Meets most European and International Standards including ASTM D6210.• Suitable for use against applications requiring the CAT EC-1 standard. Qualguard ORATEC Concentrated Coolant is an extended life antifreeze which should be replaced every five years or every 250,000 km for passenger vehicles or every 1,000,000 km for trucks and commercial vehicles. Original Equipment Manufacturers’ (OEMs) recommendations should be followed when changing out cooling systems. Qualguard ORATEC Coolant complies with most European, International & OEM quality standards: AFNOR NF R15-601 (France), AS 2108 (Australia), ASTM D3306 (USA), ASTM D4656 (USA), ASTM D6210 (USA), BS 6580: 2010 (UK), Chinese Standard GB 29743-2013 (China), CUNA NC 956-16, FVV Heft R443, SAE J 1034, UNE 26361-88, CAT EC-1 Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less

Qualguard ORATEC Coolant is a monoethylene glycol-based engine coolant concentrate. The additive package is designed with the latest inhibitor component technology to produce finished antifreeze, which is free of amine, phosphate & silicate. The combination of the long-lasting organic additives with carefully selected mineral inhibitors makes this technology extremely suitable for application in heavy-duty cast-iron engines. When mixed with water at the appropriate rate, the coolant will provide the following advantages:• Improved anticorrosion protection of all metals and especially cast iron which makes this product extremely useful in heavy duty application.• Excellent protection for cylinder liners from the effects of cavitation-erosion• Thermal characteristics that permit effective engine cooling without boiling.• Elimination of deposit problems caused by the use of hard water.• Protection against frost, depending on the concentration chosen.• Excellent antifoaming characteristics.• Meets most European and International Standards including ASTM D6210.• Suitable for use against applications requiring the CAT EC-1 standard. Qualguard ORATEC Concentrated Coolant is an extended life antifreeze which should be replaced every five years or every 250,000 km for passenger vehicles or every 1,000,000 km for trucks and commercial vehicles. Original Equipment Manufacturers’ (OEMs) recommendations should be followed when changing out cooling systems. Qualguard ORATEC Coolant complies with most European, International & OEM quality standards: AFNOR NF R15-601 (France), AS 2108 (Australia), ASTM D3306 (USA), ASTM D4656 (USA), ASTM D6210 (USA), BS 6580: 2010 (UK), Chinese Standard GB 29743-2013 (China), CUNA NC 956-16, FVV Heft R443, SAE J 1034, UNE 26361-88, CAT EC-1 Available in 1 Litre, 5 Litre & 25 Litre Quantities 

Read more less